Every program you use to write, lay out, photograph or scan already has, among its menus, the tools needed to send a clean document. You do not need to install anything special. You need to know what a file contains beyond what you can see, what each tool does, what it does not do, and when it is worth using.
This post describes document metadata and the technologies that go with it: file properties, comments and tracked changes, image data, the difference between redacting and covering, cropping, watermarks, “clean” export. A piece of metadata is data that describes other data: the author of a letter, the date it was written, the program used. Menu names vary between programs and versions; here we describe them generically, so you can recognise them on your own device.
It is the technical side of the recommendation to share documents with only what is needed. The practical sequence for using these tools, in the right order, is in the guide on how to redact a document before sending it.
How to read this list
The tools are split into four groups, like the phases of security:
- prevention: they make the file contain less from the start;
- detection: they show you what is really in the file;
- response: they remove what should not go out;
- governance: they govern how the file travels, how long it stays and who decides.
For each tool you will find the risk it reduces, its strengths, its limits, an example of use and how complex it is. One principle applies to all of them: a file has two layers, what you see on the page and what travels with it. The tools are there to make both say only what you chose.
1. Prevention technologies
Working copy and simple format
This is the habit of duplicating the file before editing it, and of choosing the simplest format that does the job: a single page instead of a bundle, a cropped image instead of a full screenshot. The ICO, the UK’s data protection regulator, in its checklist for redacting documents says to always work on a copy, never the original.
- Risk reduced: sending the wrong version and losing the complete original.
- Strengths: the original stays intact; less content to check.
- Limits: the copy inherits all the original’s metadata until you remove it.
- Example of use: you duplicate the bank statement and work on the duplicate.
- Complexity: low.
Image cropping
This is the feature that cuts an image down to one part of it. For screenshots and scans it is the simplest way to remove notifications, extra lines and backgrounds.
- Risk reduced: visible data that is not needed for the purpose.
- Strengths: immediate, available on almost every device.
- Limits: in March 2023 vulnerabilities were made public in some screenshot-cropping tools, later fixed by updates, whereby under certain conditions part of the original image stayed in the file; keep your system updated and save the cropped image as a new file.
- Example of use: from a screenshot of your online banking you keep only the line with the payment.
- Complexity: low.
Watermark
This is a line of semi-transparent text applied over the copy: recipient, purpose, date. It hides nothing, but ties the copy to a single use. France Travail, the French public employment service, presenting the State’s free watermarking tool, explains that the text discourages reuse and helps trace where a copy that went astray came from.
- Risk reduced: reuse of the copy for purposes other than the one stated.
- Strengths: simple, and especially useful for copies of ID documents.
- Limits: according to the same source it does not stop a determined fraudster with advanced image-editing tools, and some organisations may reject a document if the text covers details or codes they need to read.
- Example of use: “Copy for tenancy agreement, [date]” on the scan of your ID card.
- Complexity: low.
Camera location and data
When you photograph a document, your phone may save inside the image the location, the date and the device model. How to manage this is the subject of the recommendation on turning off photo geotagging.
- Risk reduced: a photo of a document revealing where it was taken, often your home.
- Strengths: set once.
- Limits: it does not affect what can be seen in the image.
- Example of use: you photograph a bill in the kitchen without the photo carrying your address.
- Complexity: low.
2. Detection technologies
Document properties
This is the information the program saves in the file: author, title, subject, organisation, creation and modification dates, sometimes the program used. The ICO lists author, subject and title among the metadata to check.
- Risk reduced: files that reveal who wrote them, for whom or when.
- Strengths: read in a few seconds, from the file’s properties or information.
- Limits: they do not show comments, tracked changes or text under covers.
- Example of use: in a template from a colleague you find their name as author.
- Complexity: low.
Comments, tracked changes and annotations
In office documents you can track changes and leave comments in the margin. Unless they are accepted, rejected or deleted, they stay in the file and the recipient can read them. The ICO warns that these annotations may reveal personal information that is not appropriate to disclose.
- Risk reduced: earlier versions and internal notes sent by mistake.
- Strengths: the review pane shows them all.
- Limits: sometimes the view is set to hide them, and the document looks clean.
- Example of use: in a reused CV you find a sentence written for another company.
- Complexity: low.
Hidden-data check
Many office programs offer a feature that searches the file for comments, tracked changes, properties, headers, hidden text and other items, and lets you remove them.
- Risk reduced: hidden data in parts of the file you would not check by hand.
- Strengths: checks many things at once.
- Limits: the ICO warns that some of these tools do not detect text hidden by changing its colour, nor charts placed in hidden spreadsheet columns.
- Example of use: before sending a set of minutes, the check finds two comments and the author’s name.
- Complexity: low.
Image data
Digital photos usually contain information in a standard format called EXIF: date, time, device model, sometimes coordinates. How this format works is explained in the post on EXIF photo metadata.
- Risk reduced: photos of documents revealing place and device.
- Strengths: readable from the photo’s details or information.
- Limits: some services strip this data from the public copy but may keep it.
- Example of use: the photo of your ID card contains the coordinates of your home.
- Complexity: low.
3. Response technologies
True redaction versus covering
Redacting means removing the content from the file. Covering means drawing a shape over it, a black highlighter or a box: the text stays underneath, in another layer of the file, meaning a level placed on top of the page. The ICO warns that text covered only by a shape can be recovered, sometimes simply by copying it into another format.
- Risk reduced: text that reappears with copy and paste.
- Strengths: the redaction feature permanently removes the visible content.
- Limits: in some programs removal becomes permanent only when you apply it and save the file; not all free programs offer the feature; it does not touch the metadata.
- Example of use: you remove the previous landlord’s name from a contract.
- Complexity: medium.
Clean export and flattening
Exporting the document to a simpler format, or “flattening” it, meaning merging all the layers into one, reduces what the file carries with it. PDF, the standard format for documents meant to be read and printed, is the most common choice. The ICO points out, however, that converting to PDF on its own can remove some metadata but is not a secure redaction method; among possible techniques, it mentions converting to a simple image format and then back to PDF.
- Risk reduced: layers, comments and hidden data that survive the send.
- Strengths: the result is easier to check.
- Limits: an image no longer lets the recipient select text, which can be inconvenient; it still needs checking.
- Example of use: after redacting a set of minutes, you export a flattened version.
- Complexity: medium.
Print, cover by hand and rescan
If the program does not offer redaction, you can print the document, cover the text by hand with a marker pen and scan the covered copy. The ICO notes that on paper a marker pen may let the text show through against the light, and suggests handing over a photocopy or scan of the covered copy.
- Risk reduced: text still present under digital covers.
- Strengths: needs no special software.
- Limits: slower; the scan needs checking; a light marker may not cover completely.
- Example of use: an old contract to be sent with one page redacted.
- Complexity: low.
Metadata removal
This is the set of features that remove properties, comments and tracked changes, or save a copy without them. For photos, some systems let you share without location.
- Risk reduced: names, dates and notes travelling with the file.
- Strengths: once learnt, it takes a few seconds.
- Limits: no tool guarantees to remove everything in every format; the result needs checking.
- Example of use: before publishing the association’s flyer, you remove the name of the person who laid it out.
- Complexity: low.
4. Governance technologies
Sending channel
This is the route the file takes: email attachment, chat, link to a folder, upload form, secure area. Every step can create another copy. How encryption protects data on your devices is explained in the resource on data encryption.
- Risk reduced: copies multiplying across inboxes and chats.
- Strengths: an organisation’s form keeps the file out of forwarded emails and messages.
- Limits: a form does not always exist; a shared link should be removed when no longer needed.
- Example of use: you upload the copy of your ID to the customer area instead of emailing it.
- Complexity: low.
Retention and privacy notice
Whoever processes your data must tell you how long they keep it, or the criteria they use to decide: the Garante, the Italian data protection authority, lists this among the information a privacy notice must contain. On 29/04/2026, for example, it reminded hotels and guesthouses that they may not keep copies of guests’ documents for longer than strictly necessary.
- Risk reduced: copies that stay for years for no reason.
- Strengths: you know when the copy should stop existing.
- Limits: it depends on whoever holds it; you can ask, but not check.
- Example of use: you ask the electricity supplier how long it will keep the copy of your ID.
- Complexity: low.
Procedures in an organisation
In a practice, an association or an office, the ICO recommends written redaction procedures, trained staff, clear instructions on what to remove, a sample check by a colleague and a record of who redacted what.
- Risk reduced: repeated mistakes by several people on the same documents.
- Strengths: a second pair of eyes finds what slips through.
- Limits: it takes time and a little organisation.
- Example of use: in an association, the secretary rechecks the minutes before they are published.
- Complexity: medium.
Third-party online tools
There are online services that remove metadata, add watermarks or redact documents. An online tool, however, is itself a recipient: it receives the complete file, before cleaning.
- Risk reduced: depends on the tool.
- Strengths: handy when the program you have does not offer a feature.
- Limits: the file passes through a server you do not control; it is worth reading what the service says about keeping files.
- Example of use: a public service that states it deletes files immediately after download.
- Complexity: low.
Comparison table
| Tool | Group | Risk reduced | Complexity | When to use it |
|---|---|---|---|---|
| Working copy | Prevention | Sending the wrong version | Low | Always |
| Cropping | Prevention | Extra visible data | Low | Screenshots and scans |
| Watermark | Prevention | Reuse of the copy | Low | Copies of ID documents |
| Camera location | Prevention | Place a photo was taken | Low | Before photographing documents |
| Properties | Detection | Author and dates | Low | Before every send |
| Comments and tracked changes | Detection | Versions and internal notes | Low | Reused or jointly written files |
| Hidden-data check | Detection | Data in parts not visible | Low | Office documents |
| Image data | Detection | Place and device | Low | Photos of documents |
| True redaction | Response | Text that reappears | Medium | Whenever you remove text |
| Export and flattening | Response | Layers and hidden data | Medium | Redacted documents to publish |
| Print and rescan | Response | Weak digital covers | Low | When redaction is not available |
| Metadata removal | Response | Names and notes in the file | Low | Before every send |
| Sending channel | Governance | Copies multiplying | Low | Always |
| Retention | Governance | Copies that stay | Low | ID documents and financial data |
| Procedures | Governance | Repeated mistakes | Medium | Organisations |
| Online tools | Governance | — (moves the file) | Low | Only after reading the terms |
How to choose
- If you rarely send documents: a working copy, cropping and a look at the properties are enough in most cases.
- If you often send ID documents: add a watermark, always ask which side is needed and how long it will be kept.
- If you reuse templates or files from others: check comments, tracked changes and author every time.
- If you publish documents online: redact by removal, flatten, remove the metadata and recheck everything.
- If you work in an organisation: follow the internal procedures and ask for a second check on documents with other people’s data.
The practical rule: first remove from the page what is not needed, then remove from the file what you cannot see, and finally reopen the final copy and check it.
How this connects to the Cyber Welfare Framework
| Pillar | Contribution of this content |
|---|---|
| Skills | Knowing about properties, tracked changes, image data and redaction tools, and recognising them in your own programs |
| Awareness | Understanding what each tool does and does not do, starting with the difference between covering and redacting |
| Secure Behaviour | Choosing the tools suited to the document and the recipient, and always rechecking the final copy |
Reference level: FL3 — Autonomous. This is the level where tools are chosen with judgement, rather than relying on the first black rectangle, and the result is checked. To measure your other digital habits, you can take the digital resilience self-assessment.
Conclusion
The tools needed to send a clean document are almost always already there: cropping, properties, the hidden-data check, redaction, export. None of them solves everything on its own, and some, like online tools, move the file rather than protecting it.
Used together, with the practical rule in this post, they make sure every file says only what you chose, on the page and underneath.
Related content
- Share documents with only what is needed — the recommendation this post is built on
- How to redact a document before sending it — how to use these tools, in the right order
- Document oversharing risks — what these tools protect
- EXIF photo metadata — the related topic of the data that travels inside images
Related resources
Short reads from the Resources section, for anyone who wants to focus on a single aspect:
- Metadata: The Invisible Traces That Tell Who You Are
- Share Sensitive Documents Online: Send Only What Is Needed
- Data Encryption: Already On, and Worth Understanding
Start with the first step: the Cyber Welfare Programme guides you free of charge, one recommendation at a time.




